Emerging Technologies-LLC

Emerging Technologies, LLC. was called upon to develop and build a custom Switchgear Time-Current (TC) test system incorporating a custom Mobile Current Source (MCS). The system was to further automate the testing process by adding additional functionality over the existing test system, enhance operator safety features, and reduce operator interaction.

For more information, please click here (PDF).

 

Emerging Technologies, LLC. was called upon to develop and build an EOL Test System to test Pre-Molded Circuit Boards and Post-Molded Final product. The tests were designed to verify specific stages of DUT testing had been completed on the assembly line prior to final molded product testing.

For more information, please click here (PDF).

 

Emerging Technologies, LLC was called upon to design and build a custom Pressure Leak Test System. The system was required to pressure the device under test and verify the pressure was maintained within specification over a period of time. The system was planned as standalone system to leak test two different part numbers of sheet metal product.

For more information, please click here (PDF).

 

Emerging Technologies, LLC. was called upon to develop and build an EOL Test System. The system runs an automated test sequence to validate a DUT that has been completed on an assembly line.

For more information, please click here (PDF).

 

Emerging Technologies, LLC. was called upon to develop and build a 20 Station Burn in Test system. The System needed to be capable of running 10 Pairs of DUTs. All 20 tests run Simultaneously while each pair sharing a load between the two systems.  The system is capable of running over a multi-hour period to validate the DUTs.

For more information, please click here (PDF).

 

Emerging Technologies, LLC. was called upon to develop and build a custom Electro-Mechanical Device Test System. The system electrically closes and close/opens the device for a configurable number of cycles. The system can perform close/open cycles as fast as four times per second with a delay between close to open as little as 0ms. 

For more information, please click here (PDF).

 

Emerging Technologies, LLC. was called upon to develop and build a Recloser Switch Final Test System. The systems provide integrated instruments and power supplies to accomplish the required verification and calibration of single phase, triple single, and three phase recloser switches.

For more information, please click here (PDF).

 

Emerging Technologies, LLC. was called upon to design, build, and deploy a complete test system capable of PD and high voltage testing while maintaining and economic and compact design.

For more information, please click here (PDF).

 

Emerging Technologies, LLC. was requested to design and build an automated compressor test system for pressure, flow, power and speed that included an integral synchronized burn-in routine. The system automatically controls back pressure to 100PSIG at flowrates of air up to 1.75 SCFM.

For More Information, Please Click Here (PDF)

 

 

 Emerging Technologies, LLC was called upon to design and build a custom Automated Partial Discharge & Dielectric Test System for testing multiple customer product at one time. The system was required to accommodate hundreds of variations of product for testing.

For More Information, Please Click Here (PDF)

 

 

Emerging Technologies was called upon to develop and deploy two complete functional test lines for high voltage and high current testing of power industry products. The two lines were designed to be functional duplicates. Significant challenges included development of custom current sources, Faraday cages, high voltage switches, as well as a significant volume of functional tests at two separate test stations per line. Additionally the DUT’s required a five section semi-automatic conveyor system to move the heavy product through the test stations. The customer provided an RFQ and multiple test specifications as the basis for the design.

For More Information, Please Click Here (PDF)

Emerging Technologies, LLC. was called upon to build an automated recloser control test system based on an existing customer design. The new system was required to add capacity along with existing systems.

For more information, please click here (PDF).

 

Emerging Technologies, LLC. was called upon to design and build an End Of Line test system with laser marking. The DUT was to be configured, tested, and marked.

For more information, please click here (PDF).

Emerging Technologies, LLC was called upon to design and build a custom High Voltage Conditioning and Test System incorporating a customer provided DUT fixture and safe room. The system was to verify the DUT to be correctly manufactured and provide a high voltage burn period to condition the DUT for use in the next phase of manufacturing of the final product.

For more information, please click here (PDF).

 

Emerging Technologies, LLC was called upon to develop a custom DC Power Cycling System to implement many cycles of, power up and power down, of multiple DC power based DUTs. The fixture was to be operated for extended period durability tests.

For more information, please click here (PDF).

 

Emerging Technologies, LLC was called upon to evolve an existing design, fabricate, assemble, and wire a custom test system to customer provided specification. The system was to be a near duplicate of an existing system, but include updates to the electrical design for control power interlocking and operator safety.

For more information, please click here (PDF).

 

Emerging Technologies, LLC was called upon to design and build a custom Pad Mount Switchgear Test System incorporating a customer provided manual TCC tester. The system was to further automate the testing process by adding additional functionality over the existing test system and enhance operator safety features and current accuracy.

For more information, please click here (PDF).

 

Emerging Technologies was called upon to upgrade an existing Partial Discharge Test Booth for Medium Voltage Products.  The upgrade was requested to improve throughput, reduce downtime, and migrate to newer technology hardware and software.

For more information, please click here (PDF).

 

Emerging Technologies was called upon to develop a multi-product custom pump test system for the functional test of fractional horsepower compressor pumps.

For more information, please click here (PDF).

 

 

 

 

Emerging Technologies, LLC. was called upon to provide a replacement Partial Discharge Test System. The system was to be designed for testing up to 70KV with partial discharge testing up to 26KV. The new system was to test multiple DUTs simultaneously vs. a single DUT.

For more information, please click here (PDF).

Emerging Technologies, LLC. was called upon to develop a custom Compressor Test System for functional test of a small battery operated compressor unit.

For more information, please click here (PDF).

 

 

 

 

Emerging Technologies, LLC was called upon, to take an existing ET designed custom simulator and re-design it to support additional simulation features.

 

For more information, please click here (PDF).

 

 

 

 

Emerging Technologies, LLC was called upon to re-deploy a custom test analysis program for high speed data acquisition using Python.

 

For more information, please click here (PDF).

 

 

 

 

Emerging Technologies, LLC was called upon to develop a custom durability test system to create many cycles of, manually adjustable deflection, of multiple plastic parts. The fixture was to be operated while submerged in a chilled water tank. The system was to be kept as rudimentary as possible and was to be used for a single two week durability test.

 

For more information, please click here (PDF).

 

Emerging Technologies, LLC. was called upon to design and build a custom control console to control a medium voltage test system. The power system and DUT Fixturing was provided by the customer

For more information, please click here (PDF).

 

Emerging Technologies, LLC. was called upon to develop a stand alone, portable test system for a pcb-based sub-assembly.

For more information, please click here (PDF).

 

Emerging Technologies, LLC. was called upon to develop a 320-channel data acquisition system for an accelerated life cycle test system. The specification called for an accurate, noise immune, easy to configure system. Additionally, the system needed to support the future addition of more channels.

For more information, please click here (PDF).

 

Page 1 of 4