Application Briefs

  • CURRENT TRANSFORMER RATIO TEST SYSTEM

    Emerging Technologies, LLC. was called upon to provide a replacement CT ratio test system. An existing test system was in place and failing due to age.

    Click the image for more info.

  • PAD MOUNT SWITCH GEAR TCC TEST SYSTEM

    Emerging Technologies, LLC was called upon to design and build a custom Pad Mount Switchgear Test System incorporating a customer provided manual TCC tester. The system was to further automate the testing process by adding additional functionality over the existing test system and enhance operator safety features and current accuracy.

    Click the image for more information

  • ELECTRICAL SWITCHGEAR TEST SYSTEM

    Emerging Technologies, LLC. was called upon to provide a replacement switchgear test system. An existing test system was in place and failing due to age. 

    Click the image for more info.

  • CUSTOM DESIGNED RECLOSER/SECTIONALIZER TEST SYSTEM

    Emerging Technologies, LLC. was called upon to provide a replacement recloser test system. An existing test system was in place and failing due to age. The system required flexibility to test multiple variations of made to order reclosers and
    sectionalizers. 

    Click the image for more info.

  • MULTI-DUT PANEL SUB-ASSEMBLY TEST SYSTEM

    Emerging Technologies, LLC. was called upon to design and build an automated sub-assembly functional test system for DUT’s in panelized form. 

    Click the image for more info.

  • CUSTOM CAPACITANCE TEST SYSTEM

    Emerging Technologies, LLC. was called upon to develop a custom test system to verify capacitance values of the DUT on a per model basis.

    Click the image for more info.

  • PYTHON SOFTWARE DEVELOPMENT FOR ANALYSIS AND TEST

    Emerging Technologies, LLC was called upon to re-deploy a custom test analysis program for high speed data acquisition using Python. 

    Click the image for more info.

  • PRODUCTION PROCESS TRACKING AND REPORT SYSTEM

    Emerging Technologies, LLC. was called upon to develop production process tracking and report system for a manufacturing production line. The customer-provided specification called for an easy to use software application that could help them track the process of multiple components and assemblies in a production line to eliminate the need for physical paperwork and minimizing potential operator error. 

    Click the image for more info.

  • PLANT MONITOR SYSTEM

    Emerging Technologies, LLC. was called upon to develop and program a LabVIEW application to replace a program that was built in Visual Basic 5 and runs on a Windows 95 computer. The new application was brought up to the latest version of LabVIEW and run on a windows 10 PC. Additionally, the database storage was updated from using a Microsoft Access database to a Microsoft SQL database.

    Click the image for more info.

  • OEM RELAY INTERFACE BOARD

    Emerging Technologies, LLC. was called upon to develop a circuit board that would interface TTL level control outputs with 24VDC field hardware. Additionally, field inputs and discrete communication points were to be routed through the interface.

    Click the image for more info.

  • CUSTOM PROGRAMMING/TEST SYSTEM INTERFACE

    Emerging Technologies, LLC. was called upon to develop an interface that could facilitate four related interfaces to the single customer device. The interfaces consisted of “piggy back” connection of a calibration chip or the in circuit serial programmer (ICSP), asynchronous to synchronous serial converter, and remote controlled discrete I/O. 

    Click the image for more info.

  • MULTI-CHANNEL POWER SUPPLY TEST SYSTEM

    Emerging Technologies, LLC. was called upon to provide a custom 24 load channel power supply test system. HiPot, Functional, and Environmental Stress Tests were required of the system.

    Click the image for more info.

  • MULTI-MODEL DUT FUNCTIONAL TEST SYSTEM

    Emerging Technologies, LLC. was called upon to develop and build an EOL Test System to test Pre-Molded Circuit Boards and PostMolded Final product. The tests were designed to verify specific stages of DUT testing had been completed on the assembly line prior to final molded product testing.

    Click the image for more info.

  • FUNCTIONAL TEST FIXTURE FABRICATION

    Emerging Technologies, LLC. has been called upon to provide functional test fixture fabrication for different products based on customer-provided designs and/or specifications. The customer provided the electrical design and test systems
    programming.

    Click the image for more info.

  • SERVO INTERFACE

    Emerging Technologies, LLC. was called upon to develop a Servo Interface for a new customer in the area.

    Click the image for more info.

  • CUSTOM 96 CHANNEL STATIC LOAD BASED ESS TEST SYSTEM

    Emerging Technologies, LLC. was called upon to develop custom test system to load and monitor 24 four channel power supply modules during ESS (Environmental Stress Screening) testing using a customer provided environmental chamber. 

    Click the image for more info.

  • CALIBRATION PROGRAMMING AND TEST SYSTEM

    Emerging Technologies, LLC. was called upon to develop a system to automatically, gather a subset of data, mathematically determine the remaining set of data, generate microcontroller source code based on the data, assemble the code, program the microcontroller, and test the programmed device.

    Click the image for more info.

  • PORTABLE CALIBRATION, PROGRAMMING & TEST SYSTEM

    Emerging Technologies, LLC. was called upon to design and build a custom Calibration, Programming, and Test System for a PIC16F72 based product.

    Click the image for more info.

  • CUSTOM CARD CHASSIS TEST SYSTEM

    Emerging Technologies, LLC. was called upon to build a duplicate a chassis test system based on an existing customer design currently in use at a different location. 

    Click the image for more info.

  • CUSTOM BURN-IN CHASSIS

    Emerging Technologies, LLC. was called upon to design and build custom burn-in chassis for circuit board based products. The chassis were to be designed to fit in a 19” rack mounted inside an environmental chamber. Concept to deployment schedule was expected to be short. 

    Click the image for more info.

Page 1 of 4